Fiore Skirt Pattern

£17.00

Fiore Skirt Pattern by Closet Case Patterns

Part of the Rome Collection, the Fiore Skirt is a chic, high-waisted A-line skirt with just the right amount of flare and volume. A beginner friendly pattern with multiple variations, this elevated basic has tons of outfit potential.

Suitable for beginner sewists.

This is a multisized pattern in US sizes 0-20.

In stock

 

Details

Fiore Skirt Pattern by Closet Case Patterns

Part of the Rome Collection, the Fiore Skirt is a chic, high-waisted A-line skirt with just the right amount of flare and volume. A beginner friendly pattern with multiple variations, this elevated basic has tons of outfit potential.

Available in above or below the knee lengths, the Fiore Skirt has three views. View A is a simple flared skirt with an invisible zipper at the back. View B is an asymmetrical wrap skirt with single hip pocket. View C buttons up the front with curved patch pockets.

Sizing:

This is a multisized pattern in US sizes 0-20. Final garment measurements can be found at Closet Case Patterns.

Suggested Fabric:

All views can be made with crisp wovens such as linen, chambray, denim, twill, poplin, lightweight canvas, and structured cottons.

Please note: Views A and B can also be made with drapier fabrics like rayon challis, tencel, or silk, but the patch pocket for View C should not be sewn with fluid fabrics.

Fabric Requirements:

45″/1.14m wide fabric:

  • View A
    0-8 = 1.75yd / 1.6m, 10-14 = 2yd / 1.85m, 16-20 = 2.25 yd / 2m
  • View B
    0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m
  • View C
    0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m

58″/1.5m wide fabric:

  • View A
    0-20 = 1.5yd / 1.4m
  • View B
    0-8 = 1.75yd / 1.6m, 10-20 = 2yd / 1.85m
  • View C
    0-8 = 1.5yd / 1.4m, 10-20 = 1.75yd / 1.6m

Additional Supplies:

  • Lightweight non-stretch fusible interfacing (1.25 yd / 1.1m)
  • View A = 7” (18cm) invisible zipper View B = 2 x buttons – 1/2” – 3/4” (13-19mm)
  • View B = scrap of 1/4” (6mm) twill tape or ribbon for loop closure (optional)
  • View C = 6-8 buttons – 1/2” (13mm)
  • Views B & C: Fray Stop & buttonhole chisel or seam ripper to open buttonholes
  • Polyester thread
  • Marking tool

Difficulty:

Suitable for beginner sewists.

Additional information

Garment Type

Skirts

Pattern Company

Closet Case Patterns

Skill Level

Beginner

Reviews

There are no reviews yet.

Be the first to review “Fiore Skirt Pattern”

Your email address will not be published. Required fields are marked *

You may also like…